Network topology design online4/6/2024 It is similar to a home with several telephones. The packet is sent from a computer to the segment, which serves as a conductor, explaining why the packet moves toward both ends of the cable. Terminator: When a packet is sent from a computer to a segment, it moves toward both ends of the cable.All transmissions are sent and received across this one cable. This connection is attached to a single cable that is shared by all other devices on the network. Instead of a separate connection and cable being connected to every other computer on the network, with a multipoint topology, each computer on the network has just one connection.In a LAN, however, mesh topologies are rarely used because of the expense of equipping each computer with an individual connection and because of the amount of cable required for all other computers on the network. A mesh topology is sometimes used in a wide area network (WAN) setting to ensure that all the sites continue to transmit in the event of a cable failure or another similar problem. In a network of 30 computers, each computer would need 29 connections and cables to link to every other device on the network. In a very small network of only four computers, each computer would need three connections and cables, or one for every other device on the network.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |